Comtech EF Data CDD-880 Dokumentacja Strona 45

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 92
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 44
5–1
Chapter 5. ETHERNET
MANAGEMENT
5.1 Introduction
The CDD-880 Multi Receiver Router is equipped with an RJ-45 10/100 BaseT Ethernet management
interface, labeled MANAGEMENT FE, that is used for monitor and control purposes.
This chapter provides a high-level overview of the functionality provided by this interface. For details
about using the CDD-880’s serial remote interface, see Appendix B. REMOTE CONTROL.
5.2 Ethernet Management Interface Protocols
The CDD-880’s 10/100 BaseT Fast Ethernet (FE) Management Interface supports two management
protocols:
SNMP with public and private MIB
Web Server (HTTP) Interface for complete product management
5.2.1 Ethernet Management Interface Access
Access to the CDD-880 Ethernet
Management Interface requires the user to
specify the unit’s Management IP
Address. This address may be obtained
via use of a terminal emulator connected
to the 9-pin serial CONSOLE port. As
per the example shown to the right, a
number of operational parameters
(including the unit’s default factory-
assigned IP addresses) are displayed upon
power-up of the unit.
The unit’s default factory-assigned IP addresses are as follows:
Management IP Address 192.1.1.11
Traffic (GigE) IP Address 10.10.1.11
Przeglądanie stron 44
1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 91 92

Komentarze do niniejszej Instrukcji

Brak uwag